Settings

Configuring the vehicle settings

You can configure the functions for driving and related environments.

Caution

Make sure you stop the vehicle before changing settings to ensure safety.

  • Vehicle settings can be changed only when the vehicle is on.
  • Available settings may differ depending on the vehicle model and specifications.
  • Depending on the climate control system, some functions may not be supported.
  1. On the All menus screen, press Settings Vehicle.

    The vehicle settings screen appears.

  2. Configure the settings required:

You can change the driver assistance settings.

Warning

  • •  Be sure to always check the road conditions while driving. The driving assist system helps you drive safely and conveniently. Relying solely on the driving assist system may cause violation of traffic rules and regulations, resulting in an accident.
  • •  Be sure to control the vehicle by your judgment and keep traffic regulations for safety. When the driving assist system is active, drive the vehicle with keeping eyes forward and checking the surroundings.
  • •  Not all driving assist system warnings or sub-features are necessary when they are active, and they do not replace the driver discretion under any circumstances. Stay focused on the road while driving.

Caution

Be sure to always check the vehicle surroundings while driving. The equipped cameras and sensors may not operate under all driving conditions.

Parking safety (if equipped)

You can set rear camera and parking distance warning settings.

  • •  Camera settings: Adjusts the brightness and contrast settings of the rear camera.

  • •  Parking Distance Warning Auto On: Automatically activates parking distance warning when traveling in low speeds.

Warning

  • •  Even though the vehicle is equipped the parking safety system, be sure to check any obstacles in the rear while driving. Relying solely on the driving assist system may cause an accident. Accordingly, be sure to control the vehicle by your judgment.
  • •  When the sensors cannot detect any obstacles due to the detection limit, it may cause an accident. Be sure to always check the surroundings while parking.

You can change the climate settings.

Automatic ventilation (if equipped)

Switches the ventilation system to fresh air mode automatically after an extended use of recirculated air.

  • •  Auto dehumidify: Once the inside air circulation mode has been used for a long time, it is switched to the outside air inflow mode to prevent condensation.

You can change the lights settings.

One-touch turn indicator (if equipped)

Set the number of times the turn indicator will blink when the turn signal lever is moved slightly. You can select 7 flashes, 5 flashes, 3 flashes or Off.

Headlight time-out (if equipped)

Turns off the exterior lights approximately 15 seconds after the driver exits the vehicle and closes the doors.

You can change the door settings.

Auto lock (if equipped)

Set the condition for all doors to be locked automatically. You can select Enable on shift, Enable on speed or Off.

Auto unlock (if equipped)

Set the condition for all doors to be unlocked automatically. You can select On shift to P, On key Out or Off.

You can set the data to display on the instrument cluster and the volume and type for guiding beep.

Service interval (if equipped)

Displays an alert when a specified service interval is due.

  • •  Enable service interval: Sets the service inspection interval. When it exceeds, the notification is provided.
  • •  Distance: Sets the driving distance for a service.
  • •  Duration: Sets the service cycle.
  • •  Default: Initialize the settings for distance and duration.

Energy consumption reset (if equipped)

Set the condition for automatically resetting the average energy consumption. You can select After ignition, After refuelling or Off.

Content selection (if equipped)

Specify content to be displayed on the cluster.

  • •  Wiper/Lights display: When the wiper or light lever operates, the operation mode appears.
  • •  Icy road warning: When the outside temperature drops below 4 °C (39 °F), the possibility of road icing appears.

You can change the convenience settings.

Welcome mirror (if equipped)

Specify when to automatically unfold the outside mirrors.

  • •  On door unlock: The welcome feature is enabled by the door unlock event.
  • •  On driver approach: When the driver with the smart key approaches, the welcome feature is enabled.

Wireless charging system

You can set to charge your smartphone wirelessly.

  • Available settings may differ depending on the vehicle model and specifications.
  • This feature is available only in smartphones that can be charged wirelessly.

You can initialize all system settings in the vehicle.

  • The required features cannot be initialize.